Universal H-Series Heater 150,000 BTU - Propane Gas, Low NOx
Hayward
SKU: H150FDP
Hayward Universal H-Series gas heaters are the"universal" energy efficient remedy for any new or existing pool or spa.
Replacement SKU: HS150FDP
Features
Hayward Universal H-Series gas heaters are the"universal" energy efficient remedy for any new or existing pool or spa. An industry-leading hydraulic design reduces circulation pump run time to provide energy savings of up to 18% when compared to less efficient competitors. The energy efficiency of the Universal H-Series gas heater combines with environmentally friendly low NOx emissions, a standard cupro nickel heat\ exchanger, and ultimate installation flexibility to responsibly heat a pool or spa today and for years to come.
Features and Benefits
- Standard cupro nickel heat exchanger
- Excellent salt water and chemical corrosion resistance
- Exclusive"Totally Managed" cupro nickel heat exchanger water flow
- Same water velocity through all tubes for faster heating
- Patented header by-pass design
- Reduction in pump run-time results in significant cost savings
- 2" x 2 1/2" CPVC union plumbing connections
- Forced draft system constantly moves air through the combustion chamber at a precise flow rate, eliminating the need for a high-wind stack
- Low NOx emissions - meets clean air quality standards
NOTE: Hayward Universal H-Series heaters meet or exceed the South Coast Air Quality Management District (SCAQMD Rule 1146.2) Low NOx emissions standards in all Low NOx areas that apply the SCAQMD standard.

- EXPERT LINE products can only be purchased through your local pool professional or in-store. Â Exclusions, other terms, and conditions may apply.
- 3+ Year Parts and Labor Warranties*
*When sold by a Hayward Rewards® partner. Exclusions, other terms and conditions may apply.
| Active Defrost | No |
|---|---|
| Application | New Construction, Renovation, Aftermarket |
| Boost Mode | No |
| Brand | Hayward |
| Channel | Expert Line |
| Circuit Amps | 5.5 |
| Compressor Speed | N/A |
| Cooling Capability | No |
| Fuel Type | Propane (LP) |
| GTIN | 610377047128 |
| Heating Capacity (BTU/hr) | 150,000 |
| Hertz - Heaters | 60 Hz |
| Kilowatts | 44 kW |
| Warranty - Labor | 1-year |
| Low Ambient Operation | Yes |
| Master Carton Qty | 1 |
| Maximum Breaker Size (Amps) | 15 |
| Minimum Operating Temperature | 40 °F |
| Pallet Qty | 1 |
| Warranty - Parts | 3-year |
| Phase - Heaters | 1 |
| Pool Type | In Ground |
| Product Dimensions | 24 " x 19 " x 29.5 " |
| Product Height | 24 in |
| Product Length | 29.5 in |
| Product Weight | 135 lb |
| Product Width | 19 in |
| Rear Clearance - Heaters | 6" |
| Refrigerant | Yes |
| Series Heaters | Universal H-Series Low NOx |
| Shipping Dimensions | 30.6 " x 32.8 " x 33.3 " |
| Shipping Weight | 150 lb |
| Side Clearance - Heaters | 12" |
| Silent Mode | No |
| Sub Brand | N/A |
| Voltage - Heaters | 120/240V |
| Water Flow Rate Max | 125 |
| Water Flow Rate Min | 20 |
Manuals
Questions & Answers
6 answered question(s)
Please log in to submit a question.
Q: This is my third Hayward pool heater and they suck this current one broke internally a part 0103230201 clogged my return line and now warm water is not very warm. Not real happy with this junk
By Hayward Support
Q: The plumbing will be coming in on Left Side, or from the left. Ciell this work to have the control panel on left side as well?
By Hayward Support
Q: What is the steady state amperage (current draw) of this unit? What is the surge current at start?
By Hayward Support
Q: I have a H150FD and the code IF is showing. I changed the mode and it attempts to start, but won’t. Do I need to change the fuse? If so, how do I get to it? Thanks
By Hayward Support
Q: Mine is natural gas though do you use cpv pipe to connect inlet and outlet?
By Hayward Support
Q: Can you advise when " panel circuit boards" need to be replaced is this unit what is involved and how to determine which boards need to be replaced? thank you Don
By Hayward Support




