My Cart
 

Super Pump XE Pump, 2.25 HP

Hayward

SKU: SP2615X20XE

Replacement SKU: VSP26620

Application New Construction, Renovation, Aftermarket
Brand Hayward
Channel Expert Line
DOE Compliant Yes
GTIN 610377434430
Warranty - Labor 1-year
Master Carton Qty 1
Motor Type ODP
Number of Speeds Multi Speed
Warranty - Parts 3-year
Phase Single Phase
Pool Type In Ground
Quick Clean Button No
Remote Mount Display No
Rotatable Display No
Shipping Dimensions 11.9 " x 10.6 " x 30.1 "
Shipping Weight 34 lb
Total HP 2.25 HP
Twist Lock No
Voltage at 60 Hz 230/115
WEF 8.0 / 7.9
Parts Details

Click on the part number in the diagram to display the details.

Questions & Answers

15 answered question(s)

06/24/26

Q: Button is stuck. How to fix

A:
Hello, please use our website's dealer locator to find the closest Hayward Authorized Service Center(HASC). A HASC may be needed to address this issue. Link to dealer locator: https://hayward.com/dealerlocator

By Hayward Support

06/24/26

Q: My pump is making a loud noise

A:
Hello, please use our website's dealer locator to find the closest Hayward Authorized Service Center(HASC). A HASC may be needed to address this issue. Link to dealer locator: https://hayward.com/dealerlocator

By Hayward Support

06/24/26

Q: How do I backwash the pool without disrupting the scheduled cycle?

A:
Please look at the quick start guide for help with this. Link attached https://hayward.com/media/akeneo_connector/asset_files/Q/R/QRG3200VSM_RevA_780d.pdf

By Hayward Support

06/24/26

Q: Is pump comparable with s200 sand filter?

A:
Since this is a variable speed pump you can use it with any filter system. You may need to adjust the flow rate of the pump.

By Hayward Support

06/24/26

Q: Hi I’m looking for a replacement for k48m2n111

A:
Hi, this is the motor part number, but it appears to be a 2 hp. We would suggest a TriStar950 VSP for a replacement. We do not sell direct, but you can find a list of local Hayward Authorized Dealers by clicking on the Dealer Locator tab on the home ...

By Hayward Support

06/24/26

Q: New pool, need a appropriate pump for a 16000 gallon pool with 2 bubblers and 3 jets, plumbed in 2” pipe throughout.

A:
Hi, we do not sell direct. You can find a list of local Hayward Authorized Dealers by clicking on the Dealer Locator tab on the home page of our website Hayward.com

By Hayward Support

06/24/26

Q: Where can I or who carries a Hayward super pump2 hp model # K48M2N111?

A:
Hi, you can find a list of local Hayward Authorized Dealers by clicking on the Dealer Locator tab on the home page of our website Hayward.com

By Hayward Support

06/24/26

Q: How many amps does this pump use when it’s in start up mode? I need to know what the amp will be at the highest rpm. Thanks

A:
HI, this pump requires a 20 amp breaker (240 or 120 volts) and at full load will use ~14.2 amps at 240 volts and 19.0 at 120 volts. Start up current will be in the range of 35-40 amps

By Hayward Support

06/24/26

Q: Hi, should the XE pump be wired to The load side of a time clock

A:
HI, if a XE pump is connected to the load side of the time clock it will "start over" with its programming each time the time clock turns it on. If that is preferrable then you can connect it to the load side.

By Hayward Support

06/24/26

Q: Looking for a pump I can use on a rec pond , need to move 10000 gph 10 ft head ; it needs to run continuous 24 hrs so it needs to be very energy efficient , I would prefer 2 pumps that would push 5000 to 6000 gph , you have anything in your lineup that might work

A:
Hi, our pumps are designed to circulate pool water. We couldn't recommend a pump for a pond.

By Hayward Support

06/24/26

Q: My Hayward pump is less than two years old and will not turn on no humming no clicking just does not turn on

A:
Hi, for help with this contact a local Hayward Authorized Service Center. You can find a list of them by clicking on the Dealer Locator tab on the home page of our website Hayward.com

By Hayward Support

06/24/26

Q: Is this pump to big for 18000 gl in ground pool with 7 jets?

A:
No it is not.

By Hayward Support

06/24/26

Q: how do I get my pump to stay on, the strongest setting? Every day when it starts it always reverts back to the low setting. my pump is on a timer and it's goes on at 7am and turns off at 7pm.

A:
Hi, change the speed of the first interval to a higher speed using the method shown in the quick start guide. Follow this link to access it. https://hayward.com/media/akeneo_connector/asset_files/Q/R/QRG3200VSM_RevA_780d.pdf

By Hayward Support

06/24/26

Q: Hello, replacing my super pump 700 1.5 hp and looking at this model. My plumbing is hard pipe with no wiggle room so was wondering if the housing height is the same? I also have a timer on the pool only run it during the day will this be a problem powering the pump off and on with the internal speed controls ?

A:
Hi, the plumbing should fit right up. As for the timer, any time the power is interrupted to the pump it will start back in interval 1. It is best to bypass your timer and set the pump to only run for the times you want it to.

By Hayward Support

06/24/26

Q: I have a 20 year old Hayward filter/motor combo that needs replaced. The old motor is a b2979. What combo system do I need to order to replace all of that. It also needs to work with a timer with freeze guard. Thank you!

A:
Hi, every pool is different and without more information it would be difficult to suggest the best fit for you. For help with this contact a local Hayward Authorized Service Center. You can find a list of them by clicking on the Dealer Locator tab on...

By Hayward Support