My Cart
 

Super Pump VS 700 Pump, 1.65 HP

Hayward

SKU: SP2670020VSP

Super Pump® VS 700 is a simple drop-in upgrade for Super Pump single-speed pumps up to 1.5 HP.

Replacement SKU: SP2670020VSPX1

Features

Super Pump® VS 700 is a simple drop-in upgrade for Super Pump single-speed pumps up to 1.5 HP. Built with dual voltage capability, it offers the savings of a VS pump without requiring costly rewiring. Built with a chemical-resistant Viton® seal and accompanied by a 3-year extended warranty, Super Pump VS 700 offers powerful protection for years of reliable performance.

Hayward® VS Omni ultra-high efficiency pumps provide next generation energy efficiency plus smart control of the entire pad including pumps, heaters, lighting, salt systems, cleaners, water features, and spa settings. Each model is supplied with everything needed to install smart pool control: VS Control Pad, Hub, and a Smart Relay. Up to two additional Smart Relays can be purchased for even more control.

Features and Benefits

  • Delivers up to 80% energy savings*
  • Fast and easy installation for both existing and new pools
  • Dual-voltage motor drive maintains optimal operating efficiency for long-lasting performance
  • Advanced, chemical-resistant Viton seal enhances durability in all environments
  • VS Omni model provides smartphone control for the entire pad
  • Up to two additional Smart Relays (HLH485RELAY) can be added for even more control options
  • Speed Range: 600-3450 RPM

  • NOTE: *Actual savings may vary based on comparison pump model, hours of operation, electrical rate and other hydraulic aspects such as plumbing size and length.

    • EXPERT LINE products can only be purchased through your local pool professional or in-store.  Exclusions, other terms, and conditions may apply.
    • 3+ Year Parts and Labor Warranties*

    *When sold by a Hayward Rewards® partner. Exclusions, other terms and conditions may apply.

    nsf certification logo

    NSF Certified

    NSF’s comprehensive inspection, testing and certification services ensure our products comply with all major state and provincial health codes, as well as model building and construction codes.

    Application Renovation, Aftermarket
    Brand Hayward
    Channel Expert Line
    DOE Compliant Yes
    GTIN 610377362177
    Warranty - Labor 1-year
    Master Carton Qty 1
    Motor Type TEFC
    Number of Speeds Variable Speed
    Pallet Qty 15
    Warranty - Parts 3-year
    Phase Single Phase
    Pool Type In Ground
    Quick Clean Button No
    Remote Mount Display No
    Rotatable Display No
    Shipping Dimensions 15.3 " x 12.3 " x 32.3 "
    Shipping Weight 56 lb
    Total HP 1.65 HP
    Twist Lock No
    Voltage at 60 Hz 230/115
    WEF 8.6 / 11.7
    Wiring Type Field Wire
    Parts Details

    Click on the part number in the diagram to display the details.

    Questions & Answers

    15 answered question(s)

    06/24/26

    Q: how do i override the timer to run the pump steady

    A:
    Hi, please use the quick start guide to set the speed and duration of the pump run. NOTE: the maximum continuous run time is 23 hours and 45 minutes. You can set another timer for the additional 15 minutes but the pump will cycle off momentarily between...

    By Hayward Support

    06/24/26

    Q: why does my pump stop running & the power is still on? When I turn off the pump & turn the power back on the pump restarts.

    A:
    Hello, please use our website's dealer locator to find the closest Hayward Authorized Service Center(HASC). A HASC may be needed to address this issue. Link to dealer locator: https://hayward.com/dealerlocator

    By Hayward Support

    06/24/26

    Q: I have an external controller/relay that should turn on/off the pump if it's not running thus overriding the normal schedule. Do I need to have the configuration in Relay Control for this to function thus completely eliminating the normal standalone schedule? My external relay is only on/off and doesn't have any other scheduling components.

    A:
    Hi, call our Tech Support Group for help with this issue at 908-355-7995.

    By Hayward Support

    06/24/26

    Q: Can I buy a drive board for this?

    A:
    The board itself is not available separately.

    By Hayward Support

    06/24/26

    Q: Our pump shuts off every night at midnight and I have to manually start it each morning. I want the pump to run 7/24 at speed 3. Currently the display on the pump says Speed 3 will end at 12:00 pm. How do I correct this?

    A:
    Hi, refer to the quick start guide (link attached) for help in setting the timers. Otherwise you may need to contact a local Hayward Authorized Service Center for help. You can find a list of them by clicking on the Dealer Locator tab on the home page...

    By Hayward Support

    06/24/26

    Q: I had a 4820 DE Filter and an SP2670020XSP pump installed by Country Pools and Spas from Putler PA. The installers used silicon caulking to install the 2" PVC male fitting into the pump and filters threads. Your 1011784 RevB instructions on page 8 clearly indicate using PTFE tape. When i questioned the installer I was told that silicon was an acceptable means per the manufacturer. Can you provide me the updated instructions to support the use of silicon caulking to install the PVC fittings into the threads of the pump and filter system? Thanks Chris

    A:
    HI, a lot of installers use silicone on pump installations. While it is not mentioned in our installation guide, it does not void warranty or damage the pump in any way.

    By Hayward Support

    06/24/26

    Q: W3SP2603VSP Super Pump VS Variable-Speed Pool Is this the same as VS700? If not what is the difference?

    A:
    Hi, yes it is the same pump. However, as a W3 (open line) pump available on line it comes with only a 1 year parts only warranty. The VS700 is one of our Expert Line pumps and is only available through a Hayward Authorized Dealer. It comes with a 3 years...

    By Hayward Support

    06/24/26

    Q: Hello Where can I buy the VS700 Also any available rebates or discounts?

    A:
    Hi, you can find a list of local Hayward Authorized Dealers by clicking on the Dealer Locator tab on the home page of our website Hayward.com They can tell you about any rebates or discounts available in your area.

    By Hayward Support

    06/24/26

    Q: how long should you leave the pump in recirculate?

    A:
    Hi, you should leave your filter in recirculate until the water in the sight glass is clear.

    By Hayward Support

    06/24/26

    Q: display says wire from drive check

    A:
    For help with this contact a local Hayward Authorized Service Center. You can find a list of them by clicking on the Dealer Locator tab on the home page of our website Hayward.com

    By Hayward Support

    06/24/26

    Q: I have the Hayward SP 3400 VSP And it clicks when it’s starting up. This happened after 2 days of rain. It was running great prior to the rain. It shows a “check status” light.

    A:
    Hi, for help with this contact a local Hayward Authorized Service Center. You can find a list of them by clicking on the Dealer Locator tab on the home page of our website Hayward.com

    By Hayward Support

    06/24/26

    Q: The LCD display won't turn on. What should I do?

    A:
    Hi, for help with this contact a local Hayward Authorized Service Center. You can find a list of them by clicking on the Dealer Locator tab on the home page of our website Hayward.com

    By Hayward Support

    06/24/26

    Q: Pump would not turn off, I shut power off to pump thinking it would reset. Now nothing. Gives message of keyboard error. What are my options?

    A:
    Hi, for help with this contact a local Hayward Authorized Service Center. You can find a list of them by clicking on the Dealer Locator tab on the home page of our website Hayward.com

    By Hayward Support

    06/24/26

    Q: Pump is stuck in German language and won’t go back to English so I can’t start pump

    A:
    Hi, attached is a link to the manual for your pump. Page 17 outlines how to enter the configuration menu and select the correct language. If this doesn't work there may be an issue with the control on the pump. If that is the case you would need...

    By Hayward Support

    06/24/26

    Q: How do you wire it for 115v or does it just automatically know? The old super pumps had a 115 /220v switch inside.

    A:
    Hi, someone from our Technical Service Department will contact you via email.

    By Hayward Support