Solar Pool Control with low voltage output
Hayward
SKU: GL-235
AquaSolar – Total Solar Control System with dual digital display of pool water, solar collector and auxiliary sensor temperatures.
Features
GL-235 Solar Pool Control with low voltage output
Features and Benefits
- Differential temperature control for solar heating of pools, spas, and hot tubs
- Provides differential temperature control with an adjustable temperature limit
- Selectable automatic nocturnal cooling
- Recirculation freeze protection
- Controls a 24VAC automatic valve actuator
- High voltage output for controlling a filter pump or booster pump

- EXPERT LINE products can only be purchased through your local pool professional or in-store. Exclusions, other terms, and conditions may apply.
- 3+ Year Parts and Labor Warranties*
*When sold by a Hayward Rewards® partner. Exclusions, other terms and conditions may apply.
| Application | New Construction |
|---|---|
| Brand | Hayward |
| Channel | Expert Line |
| GTIN | 761418003907 |
| Warranty - Labor | 1-year |
| Master Carton Qty | 1 |
| Warranty - Parts | 1-year |
| Pool Type | In Ground |
| Shipping Dimensions | 4 " x 7 " x 11 " |
| Shipping Weight | 3 lb |
| Series Automation | AquaSolar |
Questions & Answers
15 answered question(s)
Please log in to submit a question.
Q: Bonjour le témoin check sensor clignote sur Aqua solar gl-235 Tout est bien branché
By Hayward Support
Q: I have a Hayward gl-235 solar panel controller. I just need a replacement cover. Where can I get one? The controller is actually a Hi-Tec but the box says gl-235
By Hayward Support
Q: I have an AquaStar II solar controller and the check sensor light is blinking. What is the part number for the sensor?
By Hayward Support
Q: I have a GL 235 controller. I would like the same controller with a timer
By Hayward Support
Q: What setting do I use with the solar heat ,cool or auto
By Hayward Support
Q: I need a replacement cover gasket for my Gl-235 unit. Can u give me a part#?
By Hayward Support
Q: my unit has all the right lights but no heat . I changed both sensors
By Hayward Support
Q: All terminals wired as directed. With 235 powered up and Manual Test switch engaged there is NO OUTPUT power to booster pump. Help rectify issue or ask questions to understand. Thank you
By Hayward Support
Q: My control box temperature knob has to be turned to at least 100 degrees before valve will open. What causes temp knob to not be accurate to pool temp? Thank you.
By Hayward Support
Q: My solar pool panel has no green lights and checked all circuit breakers
By Hayward Support
Q: where is the jumper for the pins located
By Hayward Support
Q: I’ve hand this solar pool controller since summer of 2021. The last three seasons it has worked well. When we opened the pool this spring, it seems to be working in reverse (we have done nothing to the unit but turn it on). When it is off, the valve is in the open position (sending water through the solar array). When I put it in manual the valve closes. In manual all diodes eluminate (power, heat, cool). What’s wrong?
By Hayward Support
Q: Do I hav to run the pool pump if leave the heating function on auto? The home I just purchased with a pool is set to a schedule and I want to know if I should change it to run 24/7 if I want the heater to be on.
By Hayward Support
Q: I have the Aqua Solar GL-235. It burned up while I was in Mexico on vacation. Ordered one, installed it and working fine. Now the Solar Sensor is bad. What is the part number for the Solar Sensor?
By Hayward Support
Q: I have three wires from the valve actuator. Where do I connect to?
By Hayward Support

