Name: HeatPro Heat Pump, 140,000 BTU, 230V, Heat Only
SKU: HP21404T
Availability: InStock

Features

HeatPro features the industry's only standard "Ultra Gold" corrosion resistant evaporator fin which provides extreme durability, especially in coastal environments. Its compact design allows for easy installation and service on new or existing pools.

Features and Benefits

Titanium Heat Exchanger - excellent salt water and chemical corrosion resistance
Exclusive 'Ultra Gold' evaporator coil corrosion resistant especially in coastal areas
Quiet operation - quiet backyard environment
AHRI certified performance - independent lab certified performance ensures value of purchase
2in x 2 1/2in CPVC union plumbing connections - common union for installation or service, adapts to larger plumbing recommended for greater efficiencies
Light weight - less than 250 lbs

EXPERT LINE products can only be purchased through your local pool professional or in-store. Exclusions, other terms, and conditions may apply.
3+ Year Parts and Labor Warranties*

*When sold by a Hayward Rewards® partner. Exclusions, other terms and conditions may apply.

Active Defrost	No
Application	New Construction, Renovation, Aftermarket
Boost Mode	No
Brand	Hayward
Channel	Expert Line
Compressor Speed	Single-speed
Cooling Capability	No
Fan Motor Type	PSC
GTIN	610377124836
Heating Capacity (BTU/hr)	140,000
Hertz - Heaters	60 Hz
Kilowatts	41 kW
Warranty - Labor	2-year
Low Ambient Operation	No
Master Carton Qty	1
Maximum Breaker Size (Amps)	70
Minimum Operating Temperature	50 °F
Pallet Qty	1
Warranty - Parts	5-year
Phase - Heaters	1
Platform	Square
Pool Type	Above Ground, In Ground
Product Dimensions	44 " x 30.25 " x 34 "
Product Height	44 in
Product Length	34 in
Product Weight	280 lb
Product Width	30.25 in
Rear Clearance - Heaters	12"
Refrigerant	Yes
Series Heaters	HeatPro
Shipping Dimensions	50 " x 31.5 " x 40 "
Shipping Weight	327 lb
Side Clearance - Heaters	12"
Silent Mode	No
Vertical Clearance - Heaters	72"
Voltage - Heaters	230V
Water Flow Rate Max	75
Water Flow Rate Min	30

Questions & Answers

15 answered question(s)

Pop Verified User

06/24/26

Q: I recently installed the Heat Pro 140k so this is my first season operating the heat pump. I understand that the heat pump shouldn’t be allowed to sit idle with no circulation for extended periods of time but in the current summer conditions with the heat pump not being called on to operate because outside conditions are warm enough to keep the pool water temperature above set point is it ok to let water circulate through the heat pump for maybe weeks at a time while the heat pump is not being called on to run? Or, should I bypass the heat pump and drain until needed again in the fall? Hope this makes sense.

A:

Hi, your heat pump is designed to have water circulating through it any time the pool pump is running. No need to bypass it when not in use.

By Hayward Support

Johannis Verified User

06/24/26

Q: ,unexpected frozen pipe . need a new heat exchanger. The warranty cover??

A:

No. Freeze damage is not covered by warranty.

By Hayward Support

Andi A. Verified User

06/24/26

Q: Can this pump be used on a 15x30 above ground salt water pool (48 inch water depth)? I know this model is discontinued, but someone is looking to give this heater to us and wondering if it's compatible with our pool. I also know this model might be excessive for our pool size, but just wondering if compatible. Thank you!

A:

Hi, if your pump/filter system is capable of pushing a minimum of 40 gpm water through the heat pump, and you have a dedicated 50 amp 240 volt circuit available for the heat pump it will work for your pool. You may need to have a service company come...

By Hayward Support

Mark Rendon Verified User

06/24/26

Q: How can we submit a warranty?Without using our installer. Hayward HP21404T Serial # 21132110509567001 Work started 2024 Contract signed 4/15/2023

A:

Hi, for help with this contact a local Hayward Authorized Service Center. You can find a list of them by clicking on the Dealer Locator tab on the home page of our website Hayward.com

By Hayward Support

Michael Barr Verified User

06/24/26

Q: What is warranty

A:

HI, this heat pump (HP21404T) is discontinued. It has been replaced by the HP21405T and will have 3 years parts, and 1 year labor if purchased from an authorized Hayward Dealer. You can find a list of them by clicking on the Dealer Locator tab on the...

By Hayward Support

dale maharaj Verified User

06/24/26

Q: Can this be connected to WiFi remote control

A:

HI, this does not have a direct wifi connection.

By Hayward Support

Pop Verified User

06/24/26

Q: The unit has a molded “plastic” drain pan underneath it. Any problems with running a 1” drain line from the pan to get condensate away from the unit, pad, and foot traffic?

A:

Hi, you would have to set the heat pump in some sort of drain pan. It has several openings in the base pan for drainage.

By Hayward Support

BOB Verified User

06/24/26

Q: WHAT IS THE DIFFERENCE BETWEEN W3HP21404T MODEL AND THE AND THE W3HP21405T

A:

Hi, the W3HP21404T is obsolete now, but the major differences are the evaporator coil is now microchannel instead of tube and fin.

By Hayward Support

Juan Carabes Verified User

06/24/26

Q: It doesn’t start

A:

Hi, for help with this contact a local Hayward Authorized Service Center. You can find a list of them by clicking on the Dealer Locator tab on the home page of our website Hayward.com

By Hayward Support

Mike Hall Verified User

06/24/26

Q: Hi, Is this model Salt Water resistant?? How many breakers are required to operate this model. Hayward HeatPro Heat Pump, 140,000 BTU HP21404T

A:

Hi, our heat pumps are designed to hold up well in coastal environments, but exposure to salt air will eventually cause corrosion. It requires a single 240 volt 50 amp breaker.

By Hayward Support

Rob Brofman Verified User

06/24/26

Q: I have an HP21404T in my new build pool and spa in Southern California. The heater does a fine job heating the spa, however, even on a 75 degree day the heater will not provide other than minimal heat to the pool ( for example it heats starting at 8 am from 62 degrees to 70 around noon and then just stop sheating). The Hayward rep is stating that we shouldn’t expect the heater to work other than on hot summer days. Feeling this can’t be right. Any ideas if this is in fact fixable?

A:

Hi, someone from our Technical Service Department will contact you via email.

By Hayward Support

Gino R Elliott Verified User

06/24/26

Q: Can I leave a HP21404T heater on if the pool pump is not running? I know that it will show "FLO" on the display, but will it hurt the heater?

A:

Hi, yes you can! The heat pump will not operate unless the pump is running, so no harm will come to it if you leave it on.

By Hayward Support

Jason Verified User

06/24/26

Q: What is the maximum breaker I can put on this heat pump what is its fla?

A:

Hi, the maximum breaker is a 70 amp 240 volt. We recommend a 50 amp 240 volt for the best overcurrent protection.

By Hayward Support

Mike Verified User

06/24/26

Q: Is this electric

A:

Yes it is. It requires a 50 amp 240 volt dedicated circuit.

By Hayward Support

H. Hall Repair Services Verified User

06/24/26

Q: What's the factory refrigerant charge?

A:

It should be 5 lbs 14 oz, but always check the data plate on the heat pump to be sure.

By Hayward Support

HeatPro Heat Pump, 140,000 BTU, 230V, Heat Only

Features

Manuals

Questions & Answers

United States

Canada

Latin America

United Kingdom

France

Germany

Spain / Portugal

Italy

Australia

New Zealand

Asia

Africa

Middle East

HeatPro Heat Pump, 140,000 BTU, 230V, Heat Only

Features

Manuals

Questions & Answers

Related Parts

Americas

United States

Canada

Latin America

Europe

United Kingdom

France

Germany

Spain / Portugal

Italy

Oceania

Australia

New Zealand

Other Regions

Asia

Africa

Middle East