My Cart
 

HeatPro Heat Pump, 110,000 BTU, Heat Only

Hayward

SKU: HP21124T

High performance, energy-efficient HeatPro heat pumps quietly and economically maintain the ideal water temperature at all times.

Replacement SKU: HP21105T

Features

HeatPro features the industry's only standard Ultra Gold corrosion resistant evaporator fin which provides extreme durability, especially in coastal environments. Its compact design allows for easy installation and service on new or existing pools.

Features and Benefits

  • Titanium Heat Exchanger - excellent salt water and chemical corrosion resistance
  • Exclusive 'Ultra Gold' evaporator coil corrosion resistant especially in coastal areas
  • Quiet operation - quiet backyard environment
  • AHRI certified performance - independent lab certified performance ensures value of purchase
  • 2in x 2 1/2in CPVC union plumbing connections - common union for installation or service, adapts to larger plumbing recommended for greater efficiencies
  • Light weight - less than 250 lbs.
  • EXPERT LINE products can only be purchased through your local pool professional or in-store.  Exclusions, other terms, and conditions may apply.
  • 3+ Year Parts and Labor Warranties*

*When sold by a Hayward Rewards® partner. Exclusions, other terms and conditions may apply.

Active Defrost No
Application New Construction, Renovation
Boost Mode No
Brand Hayward
Channel Expert Line
Compressor Speed Single-speed
Cooling Capability No
Fan Motor Type PSC
GTIN 610377239318
Heating Capacity (BTU/hr) 110,000
Hertz - Heaters 60 Hz
Kilowatts 32 kW
Warranty - Labor 2-year
Low Ambient Operation No
Master Carton Qty 1
Maximum Breaker Size (Amps) 70
Minimum Operating Temperature 50 °F
Pallet Qty 1
Warranty - Parts 5-year
Phase - Heaters 1
Platform Square
Pool Type Above Ground, Commercial, In Ground
Product Dimensions 44 " x 30.25 " x 34 "
Product Height 44 in
Product Length 34 in
Product Weight 245 lb
Product Width 30.25 in
Rear Clearance - Heaters 12"
Refrigerant Yes
Series Heaters HeatPro
Shipping Dimensions 51 " x 31 " x 36.5 "
Shipping Weight 282.5 lb
Side Clearance - Heaters 12"
Silent Mode No
Vertical Clearance - Heaters 72"
Voltage - Heaters 230V
Water Flow Rate Max 75
Water Flow Rate Min 30

Questions & Answers

10 answered question(s)

06/24/26

Q: Hi I'm looking for a defrost sensor for a BHP21254T can I order from you or is there a dealer in the St.Louis area

A:
We do not sell direct, but you can find a list of local Hayward Authorized Dealers by clicking on the Dealer Locator tab on the home page of our website Hayward.com

By Hayward Support

06/24/26

Q: Do any of the connections in the Remote Control panel provide the water temperature? If not, is there another place on this unit that provides it? I am looking to automate this heater and need to be able to sense the water temperature.

A:
Hi, no they do not. We would not advise connecting to a remote panel other than as prescribed in the manual.

By Hayward Support

06/24/26

Q: Do you sell a cover for this heat pump

A:
Hi, no we do not.

By Hayward Support

06/24/26

Q: How much do you save on thisheat pump

A:
Heat Pumps generally save 50-70% over gas heat, but results will vary depending on location and average ambient temperature.

By Hayward Support

06/24/26

Q: What is the maximum pool temperature for the HP21124T? I own one, I see a pool setting and a spa setting. I do not have a spa, but right now my maximum temperature through the Omnilogic system says 90, however I believe it's 95 for the pool and 104 if a spa is connected.

A:
HI, the maximum setting on the heat pump is 104 degrees.

By Hayward Support

06/24/26

Q: Will this system have a pool/ spa control?

A:
Yes it will.

By Hayward Support

06/24/26

Q: is the hp21124t programable

A:
Hi, you can set a temperature on the heater, but it does not have programming capability in the heat pump. It can be connected to a control such as our OmniLogic though. It requires two low voltage wires, and then the heat pump can be programmed through...

By Hayward Support

06/24/26

Q: Looking at Model HP21124T so orientation is from the front, is the knockout for the electric on the front right lower corner? Same orientation (looking at unit from the front) is the water connection that is returning water to the pool also on the right ?

A:
HI, there are knockouts for the electrical on both sides of the base pan. You are correct on the water connections. When standing at the control end of the heat pump (water connections on the opposite end) the inlet is on the left and outlet back to ...

By Hayward Support

06/24/26

Q: Looking at purchasing this heat pump. Want to get the most simple above ground pool pump you have available to go with it. For most, I don't see anything in the pump descriptions re: HP of the motor and I don't see any that specify a flow rate. Want to know what pump options I have for this heater since water flow requirement is 30-75

A:
Hi, this heat pump is not designed for ABG pools. I would suggest either the HP50HA2, or the HP70HA2 heat pumps.

By Hayward Support

06/24/26

Q: what do you do with unit not working and an FS code?

A:
Hi Mitch, you can find a list of local Hayward Authorized Service Centers for your area by clicking on the Support Tab on our website - Hayward.com - then selecting the warranty tab. Under purpose of search click on Warranty Service and a list of local...

By Hayward Support