AquaRite Salt System w/40,000 gallon TurboCell (Open Line)
Hayward
SKU: W3AQR15
AquaRite Salt Chlorination Systems automatically convert salt into chlorine for cleaner pool water.
Features
AquaRite Salt Chlorination Systems automatically convert salt into chlorine for cleaner pool water. Experience softer, silkier pool water that won’t irritate eyes, dry out skin or cause fabrics to fade.
Features and Benefits
- Automatically converts salt into chlorine, 2400-3400 ppm
- Softer, silkier pool water that won’t irritate eyes, dry out skin or cause fabrics to fade
- Simple homeowner operation
- Adjust chlorine output from 0-100%
- NSF certified for chlorine delivery rates
- Easy to understand digital display
- Automatic cell cleaning using reverse polarity technology
- Superchlorinate function
- Single unit for 120VAC/240VAC 50/60Hz input
- Weatherproof enclosure and connections
- ETL safety certified
| Application | Aftermarket |
|---|---|
| Brand | Hayward |
| Channel | Open Line |
| GTIN | 610377388139 |
| Warranty - Labor | None |
| Master Carton Qty | 1 |
| Warranty - Parts | 1-year |
| Pool Type | In Ground |
| Shipping Dimensions | 8.4 " x 14.1 " x 18.3 " |
| Shipping Weight | 24.5 lb |
| Series Water Quality | AquaRite 900 |
| Salt (lbs/day) | 1.45 |
| Water Quality Type | Salt Chlorinators |
| Twist Lock | No |
Manuals
Questions & Answers
15 answered question(s)
Please log in to submit a question.
Q: I need to get a replacement cell for my HAYWARD Goldline TurboCell TCELL 940. Is the T-Cell 15 Salt Cell the same thing?
By Hayward Support
Q: Hi, my AquaRite control panel is stuck in Diagnostics mode. The manual says pressing the button 9 times or waiting for 30 seconds should put it back to normal but mine doesn’t leave diagnostics mode ever. How do I get it back to normal?
By Hayward Support
Q: Yesterday my controller was showing 3400. This morning it is showing 2600. What can be wrong.
By Hayward Support
Q: Do you have the part number or description of the door toggle latch. My latch is completely rusted. Product -AQR15
By Hayward Support
Q: Is this system compatible with a Pentair Intelliflo Pro3 VSF pool pump?
By Hayward Support
Q: I have the AquaRite salt chlorinator and T9 cell. There’s power to the device because the diagnostic display is on but the green “power” led and “generating” led turn on and off randomly after short periods. Is the unit functioning correctly or should the power led be on constantly ?
By Hayward Support
Q: What is the amperage requirement for the W3AQR15 system if it runs on 120V?
By Hayward Support
Q: Can I buy this is 220 Volt for Bali Indonesia
By Hayward Support
Q: What is replacement product for w3aqr15 which is discontinued
By Hayward Support
Q: looking for in depth trouble shooting manual for voltages across transformer and at rectifier , the one sent a few days ago wont open
By Hayward Support
Q: How do I know what product code number to set too? AL 0-5?
By Hayward Support
Q: I have a T15 generator on Aqua Rite chlorine generator for 35,000 gallon pool. Generator stopped working and pool overwhelmed by algae. Checked and cleaned generator with acid wash. Prior to cleaning salt level read 1700 continuously even after adding salt. Leslie store checked cell and deemed it to be working properly. Then recalibrated (many times). Now salinity reads zero. With a calibration attempt, only occassionally does salinity scroll through numbers as described only to then display zero. After calibration, generating light will appear, only to disappear after a couple minutes. Do I need new motherboard?
By Hayward Support
Q: how do i register this product for warranty
By Hayward Support
Q: I am in need of a replacement motherboard for a Hayward Aquarite salt chlorine generator. it is for a 40000 gallon pool there is no number on the plate but it is a T15 generator. Can you help with a replacement?
By Hayward Support
Q: How do I enter for a warranty
By Hayward Support
