My Cart
 

AquaRite Salt System w/25,000 gallon TurboCell (Open Line)

Hayward

SKU: W3AQR9

AquaRite Salt Chlorination Systems automatically convert salt into chlorine.

Features

AquaRite Salt Chlorination Systems automatically convert salt into chlorine for cleaner pool water. Experience softer, silkier pool water that won’t irritate eyes, dry out skin or cause fabrics to fade.

Features and Benefits

  • Automatically converts salt into chlorine, 2400-3400 ppm
  • Softer, silkier pool water that won’t irritate eyes, dry out skin or cause fabrics to fade
  • Simple homeowner operation
  • Adjust chlorine output from 0-100%
  • NSF certified for chlorine delivery rates
  • Easy to understand digital display
  • Automatic cell cleaning using reverse polarity technology
  • Superchlorinate function
  • Single unit for 120VAC/240VAC 50/60Hz input
  • Weatherproof enclosure and connections
  • ETL safety certified
Application Renovation, Aftermarket
Brand Hayward
Channel Open Line
GTIN 610377388252
Warranty - Labor None
Master Carton Qty 1
Warranty - Parts 1-year
Pool Type In Ground
Shipping Dimensions 8 " x 14 " x 19 "
Shipping Weight 24.6 lb
Series Water Quality AquaRite 900
Salt (lbs/day) 0.9
Water Quality Type Salt Chlorinators
Twist Lock No

Questions & Answers

15 answered question(s)

06/24/26

Q: My system indicates "low salt", When this occurs, does the system automatically stop generating? When I add more salt, the concentration does not always go up. But, I am getting green walls.

A:
Hello, please use our website's dealer locator to find the closest Hayward Authorized Service Center(HASC). A HASC may be needed to address this issue.

By Hayward Support

06/24/26

Q: T9 cell was just turned on salt is 3000ppm. Instant salinity reads negative 2900. Is that a priblem?

A:
No, it is not.

By Hayward Support

06/24/26

Q: How do I find what control unit I have

A:
Hi, call our Tech Support Group for help with this issue at 908-355-7995.

By Hayward Support

06/24/26

Q: My aquarite 900 outer box is hot to the touch and it smells electrical. Our pool was installed 3 years ago and I’ve already had to replace the salt generator system just last year because some of the wiring coming into the unit fried. Is this a common problem? $1600 every summer isn’t a cost we can afford. Advice? Thank you

A:
Hi, call our Tech Support Group for help with this issue at 908-355-7995.

By Hayward Support

06/24/26

Q: We have a 17,000 gallon pool would it be a good idea to oversize the salt chlorine generator

A:
Having a cell that supports larger gallons than what you have is fine. You run them at a lower output.

By Hayward Support

06/24/26

Q: My salt generator won’t react when checking settings. Its shows 2600 salt but I know it’s more …

A:
Hello, please use our website's dealer locator to find the closest Hayward Authorized Service Center(HASC). A HASC may be needed to troubleshoot this issue. Link to dealer locator: https://hayward.com/dealerlocator

By Hayward Support

06/24/26

Q: Can the ELECTROLYTIC Cell unit and flow switch be installed vertically?J

A:
Yes.

By Hayward Support

06/24/26

Q: How can I know which system I have, r1.4 to r1.5?

A:
Press the diagnostic button until it shows the firmware rev.

By Hayward Support

06/24/26

Q: The terminals on my salt generator are corroded but the cell is only 1 year old. Is there a repair kit? Can I order just the harness?

A:
Hi, call our Tech Support Group for help with this issue at 908-355-7995.

By Hayward Support

06/24/26

Q: How can I update my software from r1.4 to r1.5?

A:
No. You would have to replace the board for one with the new firmware.

By Hayward Support

06/24/26

Q: Good morning, my Hayward Swim Pure electronic chlorine generator power and generating light comes on for few seconds and turns off.It does that every 4 minutes.

A:
Please use our website's dealer locator to find the closest Hayward Authorized Service Center(HASC). A HASC may be needed to troubleshoot this issue.

By Hayward Support

06/24/26

Q: T-cell 9 SWP is it the same unit as the w3t cell 9 turbo

A:
Yes, it is.

By Hayward Support

06/24/26

Q: How can I update the firmware on the motherboard to the latest rev?

A:
Hi, give our Tech Support Group a call for help with this issue 908-355-7995.

By Hayward Support

06/24/26

Q: where is the flow switch on Salt chlorine generator

A:
Here is a link to the manual for the AquaRite, It has information on installing the flows witch. https://hayward.com/media/akeneo_connector/asset_files/0/9/092540_RevG_585e.pdf

By Hayward Support

06/24/26

Q: My salt is staying at 3500 for a month now. Device is 2 years old.

A:
Hello, Someone from our technical team will contact you shortly.

By Hayward Support