AquaRite S3 Salt System, 40,000 gallons

Q: I have an old W3AQR15 40K gal. Does the AquaRite S3 salt system have the same measurements so i replace it without having to cut any cutting of pipes

Q: Where is the fuse?

Q: We installed this system last year. Our pool was opened 4 days ago and yesterday, the unit stopped working entirely. There is no way to turn it on. I have checked all electrical fuses, changed the fuse in the unit and tested a GFI's . Is there some kind of work around or way to trouble shoot this?? Very disappointing.

Q: What does it cost?

Q: I just purchased the aquarite S3 with 340 t cell. I live in long island. I set for super chlorinated and the online main screen it show only 10%. What does that mean? If set to 100 chlorination and cell temperature is below 60 degrees it show on main screen 20%. Why is that? My pool isn't getting any cleaner afterv2 days still very green. Why isn't the chlorination working on my new AquariteS3? Thanks

Q: I just had a new system installed and added salt yesterday. Today the salt is reading very high and I added less salt than what was recommended

Q: I have a brand new system installed June 2024, winterized the pool and now opened it and when I try to turn on the system nothing happens.

Q: S3 system saying high salt alarm 4300. Pool place tested salt and said it’s at 3600. How do I reset salt alarm and get an accurate reading on average salt? Also why would air temp and water temp have :warning:️next to it and a red icon with looks like an X on it?

Q: How to adjust time

Q: What is the minimum gallons per minute that the salt sell requires?

Q: I have a 40,000 gallon pool built in 2006 with a T-cell-15. I have replaced the cell once (approximately 8 years ago). Two years ago, the control system began to provide incorrect readings of the salt content in the pool. The salt cell has always been cleaned at the end of the season. Last year, I asked the company that services the pool to try tune up the control panel but the readings continued to be wrong. The company says that I only need to replace the cell but I am afraid that spending the money on the cell without replacing the control panel could be a waste of money because the problem may lie with the panel and not the cell. What would you advise?

Q: I currently have a Hayward W3T-cell-15. I need to replace the entire system. Should I go with the W3AQR9 or the Aquarite S3?

Q: I have a 20year old Aqua Rite Salt System control 5A0510 what is a replacment for this control

Q: Do you have step by step guide for first user I have a AQRS340 Aquarite S3 Series. I have the salt but don’t how to operate the system

Q: I am interested in the SKU: HYDRAPURE and a salt system and would like to understand if the Sense & Dispense systems can all work together and if yes what model salt and sense & dispense systems would integrate as a complete automated system. It is and Inground system with a lap pool and hot tub